Fix Finder
What’s the problem?
Household
61 fixes
Why does my soft starter trip on overload during motor startup?
A soft starter trips on overload during startup when the motor draws excessive current for too long while ramping up, usually because…
See the fixWhy does my three-phase motor draw high current at no load?
A three-phase motor drawing high no-load current usually indicates a stator winding fault, rotor bar damage, or incorrect voltage supply. Check supply…
See the fixWhy does my three-phase motor draw unbalanced current across phases
Unbalanced current in a three-phase motor usually means a problem with the power supply, motor windings, or connections. Common causes include a…
See the fixWhy does my three-phase motor hum but not start when I press the button?
A three-phase motor that hums but won't start usually has a lost phase, bad capacitor, or mechanical binding. Check for open fuses,…
See the fixWhy does my three-phase motor hum but not start when I press the start button?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor, or a mechanical jam preventing rotation.…
See the fixWhy does my three-phase motor hum but not start?
A three-phase motor that hums but won't start usually has a lost phase, a mechanical jam, or damaged windings. First check for…
See the fixWhy does my three-phase motor hum but won't start?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor (if single-phase), or a mechanical jam.…
See the fixWhy does my three-phase motor hum loudly but not turn when I press start?
A three-phase motor that hums but won't rotate typically indicates a single-phased power supply, a blown fuse, or a mechanical binding like…
See the fixWhy does my three-phase motor trip the overload relay after running for 10 minutes?
A three-phase motor that trips its overload relay after 10 minutes usually has a high-resistance connection, a failing bearing, or an undervoltage…
See the fixWhy does my three-phase motor trip the overload relay after running for 20 minutes?
A three-phase motor that trips its overload relay after 20 minutes usually has a mechanical binding, voltage imbalance, or an undersized overload…
See the fixWhy does my three-phase motor trip the overload relay intermittently during startup?
A three-phase motor trips its overload relay during startup because the motor draws excessive current due to mechanical binding, low voltage, a…
See the fixWhy does my three-phase motor vibrate excessively at startup?
Excessive vibration at startup usually means misaligned coupling, unbalanced rotor, or loose mounting bolts causing mechanical resonance. Check alignment with a dial…
See the fix











