Fix Finder
What’s the problem?
Household
78 fixes
Why does our facility's energy bill spike every summer despite similar usage?
Your summer bill spikes because utility demand charges penalize the highest 15-minute power draw, which rises when HVAC runs harder in heat,…
See the fixWhy does our facility's energy bill spike every summer?
Summer bill spikes usually come from HVAC systems running longer to combat heat, increased lighting hours, and higher utility rates during peak…
See the fixWhy does our facility's power factor keep dropping and causing penalty fees on our utility bill?
A dropping power factor means your equipment draws more reactive power, so the utility charges penalties for the extra current on their…
See the fixWhy does our factory's compressed air system waste so much energy?
Compressed air systems waste energy mainly through leaks, excessive pressure, and improper sizing — leaks alone can squander 20-30% of compressor output.…
See the fixWhy does our HVAC keep running after hours and running up our energy bill?
Your HVAC is likely running after hours because a programmable thermostat is misconfigured, an occupancy sensor is faulty, or a stuck relay/contactor…
See the fixWhy does our HVAC system run after hours driving up costs?
Your HVAC runs after hours because the thermostat schedule is wrong, the building management system has an override, or a faulty occupancy…
See the fixWhy does our HVAC system run constantly after business hours and spike our energy bill
Your HVAC likely runs after hours because of a misprogrammed thermostat, faulty occupancy sensor, or stuck relay keeping the system in occupied…
See the fixWhy does our HVAC system run constantly after hours and spike our energy bill?
Your HVAC likely runs after hours because the thermostat schedule is wrong, a faulty sensor keeps calling for heating or cooling, or…
See the fixWhy does our HVAC system run up costs after hours?
Your HVAC likely runs after hours because of incorrect thermostat schedules, faulty occupancy sensors, or a stuck relay keeping the system on.…
See the fixWhy does our main breaker trip when the air compressors start up?
Your main breaker trips because the combined inrush current from multiple air compressors starting simultaneously exceeds the breaker's instantaneous trip threshold, especially…
See the fixWhy does our packaging line conveyor keep tripping the 20-amp breaker every afternoon?
Your conveyor likely trips the breaker because afternoon heat raises motor current above the 20‑amp limit, especially if the circuit also feeds…
See the fixWhy does our transformer overheat and trip when the VFD pumps are running?
Variable frequency drives (VFDs) inject harmonic currents back into your electrical system, which makes transformers run hotter and can trip thermal protection…
See the fix











