Fix Finder
What’s the problem?
Household
78 fixes
Why does our UPS system draw high standby power and raise our electricity bill?
A UPS that stays in online double‑conversion mode or has aging batteries can draw 5‑15 % of its rated load continuously, adding hundreds…
See the fixWhy does our warehouse HVAC keep running after closing time?
Your HVAC runs after hours because the thermostat schedule is wrong, a faulty sensor keeps calling for cooling, or the economizer damper…
See the fixWhy does our warehouse LED lighting flicker when large motors start?
Your warehouse LED lights flicker when large motors start because the motor inrush current causes a voltage drop on the shared circuit,…
See the fixWhy does our warehouse LED lighting flicker when the forklift chargers start?
Flickering warehouse LEDs when forklift chargers start usually means the chargers' inrush current causes voltage sags on a shared circuit. The fix…
See the fixWhy does our warehouse lighting flicker when heavy machinery starts up?
Flickering lights when large motors start usually means voltage drops from inadequate wiring, undersized transformers, or loose connections that can't handle the…
See the fixWhy is my commercial electricity bill so high when we didn't use more power?
Most likely, your bill charges you for demand, not just usage. Demand charges bill you for the single highest 15-minute power draw…
See the fixWhy is our commercial electric bill's demand charge so high this month?
Your demand charge spikes because multiple high-power machines start simultaneously, creating a short 15-minute peak that sets the monthly rate. Check your…
See the fixWhy is our commercial electricity bill showing high demand charges even though usage hasn't changed?
High demand charges usually come from brief spikes in power draw during a 15‑minute window, not total energy used. Check your interval…
See the fixWhy is our commercial electricity bill still high after upgrading to LED lighting?
Your bill stays high because demand charges — fees for your peak 15-minute usage — often outweigh lighting savings, and hidden loads…
See the fixWhy is our commercial HVAC system running continuously after hours and driving up demand charges?
Your HVAC likely runs after hours because the thermostat schedule is misconfigured, the building automation system has an overridden schedule, or a…
See the fixWhy is our compressed air system consuming 30% of our plant's electricity
Compressed air systems often waste 30% of a plant's electricity due to leaks, excessive pressure, and inappropriate uses like cooling or cleaning.…
See the fixWhy is our facility getting hit with high power factor penalties on the electric bill?
Your facility is drawing too much reactive power, triggering a utility power factor penalty. This happens when inductive loads like motors and…
See the fix











