Fix Finder
What’s the problem?
Household
1,017 fixes
Why does my solar inverter shut down at noon when production should be highest?
Your inverter likely shuts down at noon because grid voltage rises too high when local solar production peaks, triggering its anti-islanding protection.…
See the fixWhy does my tankless water heater display error code 11 and stop heating?
Error code 11 means the heater tried to ignite but failed. Common causes: gas supply off or low pressure, dirty igniter or…
See the fixWhy does my tankless water heater give me a cold water sandwich?
A cold water sandwich happens when a tankless heater briefly delivers cold water between hot bursts, usually because the flow sensor needs…
See the fixWhy does my three-phase motor draw high current at no load?
A three-phase motor drawing high no-load current usually indicates a stator winding fault, rotor bar damage, or incorrect voltage supply. Check supply…
See the fixWhy does my three-phase motor draw unbalanced current across phases
Unbalanced current in a three-phase motor usually means a problem with the power supply, motor windings, or connections. Common causes include a…
See the fixWhy does my three-phase motor hum but not start when I press the button?
A three-phase motor that hums but won't start usually has a lost phase, bad capacitor, or mechanical binding. Check for open fuses,…
See the fixWhy does my three-phase motor hum but not start when I press the start button?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor, or a mechanical jam preventing rotation.…
See the fixWhy does my three-phase motor hum but not start?
A three-phase motor that hums but won't start usually has a lost phase, a mechanical jam, or damaged windings. First check for…
See the fixWhy does my three-phase motor hum but won't start?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor (if single-phase), or a mechanical jam.…
See the fixWhy does my three-phase motor hum loudly but not turn when I press start?
A three-phase motor that hums but won't rotate typically indicates a single-phased power supply, a blown fuse, or a mechanical binding like…
See the fixWhy does my three-phase motor trip the overload relay after running for 10 minutes?
A three-phase motor that trips its overload relay after 10 minutes usually has a high-resistance connection, a failing bearing, or an undervoltage…
See the fixWhy does my three-phase motor trip the overload relay after running for 20 minutes?
A three-phase motor that trips its overload relay after 20 minutes usually has a mechanical binding, voltage imbalance, or an undersized overload…
See the fix











