Fix Finder
What’s the problem?
Household
1,537 fixes
Why is my well pump cycling on and off constantly?
A well pump that cycles on and off constantly usually means the pressure tank is waterlogged, the pressure switch is misadjusted, or…
See the fix
Why is my well pump cycling on and off too often?
Your well pump cycles too often because the pressure tank has lost its air charge, so the pump turns on and off…
See the fix
Why is my well pump cycling too often?
Your well pump cycles too often because of a waterlogged pressure tank, a leak in the system, or a faulty pressure switch.…
See the fix
Why is one of my solar panels producing less power than the others?
The most likely cause is partial shading — a tree branch, chimney shadow, or bird droppings on just that panel. Other causes…
See the fix
Why is only half my house without power after a power outage?
If only half your house lost power after an outage, one of the two 120-volt legs feeding your panel is likely dead…
See the fixWhy is only my house without power while neighbors have electricity?
Your house likely has a tripped main breaker, a faulty service disconnect, or a problem with the utility's connection to your meter.…
See the fix
Why is our commercial electric bill's demand charge so high this month?
Your demand charge spikes because multiple high-power machines start simultaneously, creating a short 15-minute peak that sets the monthly rate. Check your…
See the fix
Why is our commercial electricity bill still high after upgrading to LED lighting?
Your bill stays high because demand charges — fees for your peak 15-minute usage — often outweigh lighting savings, and hidden loads…
See the fixWhy is our commercial HVAC system running continuously after hours and driving up demand charges?
Your HVAC likely runs after hours because the thermostat schedule is misconfigured, the building automation system has an overridden schedule, or a…
See the fixWhy is our compressed air system consuming 30% of our plant's electricity
Compressed air systems often waste 30% of a plant's electricity due to leaks, excessive pressure, and inappropriate uses like cooling or cleaning.…
See the fix
Why is our facility getting hit with high power factor penalties on the electric bill?
Your facility is drawing too much reactive power, triggering a utility power factor penalty. This happens when inductive loads like motors and…
See the fix
Why is our facility getting hit with high power factor penalties on the utility bill?
Your facility likely has a low power factor caused by inductive loads like motors and transformers drawing reactive power, which utilities penalize…
See the fix