Fix Finder
What’s the problem?
Household
1,741 fixes
Why does my iPhone only charge when I hold the cable at a specific angle
Your iPhone's Lightning port likely has lint compacted deep inside or bent connector pins. Power off the phone, then gently scrape the…
See the fixWhy does my iPhone say 'Accessory Not Supported' when charging with a genuine cable?
Your iPhone shows 'Accessory Not Supported' because the Lightning port has debris, the cable's authentication chip failed, or iOS rejected a non-MFi…
See the fixWhy does my iPhone say 'Liquid Detected' when I plug in a charger?
When your iPhone shows 'Liquid Detected' while charging, moisture is likely in the Lightning or USB‑C port. Unplug immediately, tap the phone…
See the fixWhy does my iPhone say 'Liquid Detected' when I plug in the charger but it hasn't gotten wet?
Your iPhone's lightning port detects moisture through tiny electrical sensors that can trigger false alarms from humidity, condensation after temperature changes, pocket…
See the fixWhy does my iPhone say 'Liquid Detected' when I plug in the charger even though it didn't get wet?
Your iPhone's Lightning or USB-C port likely has moisture, debris, or corrosion triggering the false liquid detection alert. Dry the port gently…
See the fixwhy does my iPhone say 'This accessory may not be supported' when charging with a cable that worked before
Your iPhone is rejecting the cable because its Lightning connector pins are dirty, bent, or the cable's authentication chip has failed —…
See the fixWhy does my iPhone stop charging at 80% and how do I fix it?
Your iPhone stops at 80% because Optimized Battery Charging learns your routine to reduce battery wear; you can disable it in Settings…
See the fixWhy does my iPhone stop charging at 80% and show 'Optimized Battery Charging'?
Your iPhone stops at 80% because Optimized Battery Charging is enabled — a feature that learns your routine and delays charging past…
See the fixWhy does my irrigation pump keep losing pressure?
Your irrigation pump loses pressure because of air leaks in the suction line, a worn impeller, a clogged intake screen, or a…
See the fixWhy does my irrigation pump lose pressure after running for 20 minutes?
Your irrigation pump likely loses pressure due to a clogged intake screen, air leak in the suction line, or a worn impeller…
See the fixWhy does my irrigation pump lose pressure after running for 30 minutes?
Your irrigation pump likely loses pressure after 30 minutes because the well screen is clogged, the pump is overheating, or the pressure…
See the fixWhy does my irrigation pump lose pressure when multiple zones run?
Your irrigation pump loses pressure when multiple zones run because the pump cannot supply enough flow for the combined demand, often due…
See the fix











