Fix Finder
What’s the problem?
Household
1,531 fixes
Why does my tankless water heater display error code 11 and stop heating?
Error code 11 means the heater tried to ignite but failed. Common causes: gas supply off or low pressure, dirty igniter or…
See the fixWhy does my three-phase motor draw unbalanced current across phases
Unbalanced current in a three-phase motor usually means a problem with the power supply, motor windings, or connections. Common causes include a…
See the fix
Why does my three-phase motor hum but not start when I press the button?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor, or a seized bearing preventing rotation.…
See the fix
Why does my three-phase motor hum but not start when I press the start button?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor, or a mechanical bind. Check for…
See the fix
Why does my three-phase motor hum but not start?
A three-phase motor that hums but won't start usually has a missing phase, a bad capacitor (if single-phase), or a mechanical bind…
See the fix
Why does my three-phase motor hum but won't start?
A three-phase motor that hums but won't start usually means one phase is missing, a starter contact is bad, or the motor…
See the fix
Why does my three-phase motor hum loudly but not turn when I press start?
A three-phase motor that hums but won't rotate typically indicates a single-phased power supply, a blown fuse, or a mechanical binding like…
See the fix
Why does my three-phase motor trip the overload relay after running for 10 minutes?
A three-phase motor that trips its overload relay after 10 minutes usually has a high-resistance connection, a failing bearing, or an undervoltage…
See the fix
Why does my three-phase motor trip the overload relay after running for 20 minutes?
A three-phase motor that trips its overload relay after 20 minutes usually has a mechanical binding, voltage imbalance, or an undersized overload…
See the fix
Why does my three-phase motor trip the overload relay intermittently during startup?
A three-phase motor trips its overload relay during startup because the motor draws excessive current due to mechanical binding, low voltage, a…
See the fixWhy does my three-phase motor vibrate excessively at startup?
Excessive vibration at startup usually means misaligned coupling, unbalanced rotor, or loose mounting bolts causing mechanical resonance. Check alignment with a dial…
See the fix
Why does my TP-Link Kasa smart plug keep disconnecting from Wi-Fi
Your TP-Link Kasa smart plug loses Wi-Fi because it's too far from the router, the 2.4 GHz band is congested, or the…
See the fix